ÓÈÎïÉç

Polishing is the third (and most noticeable) step of the 4 step professional maintenance program. This pro grade formula leaves an attractive and glossy finish polish that resists heel marks and prevents slips in high traffic areas.

• ÓÈÎïÉç Wet Look Floor Polish is ideal for supermarkets, lobbies, schools, retail stores and places that are frequently buffed or burnished.
• Resistant to slips, scuffs, black heel marks and restores floors
• Ideal for frequently buffed floors. Clear finish ensures lasting shine
• Apply 4 thin coats in figure 8 motion with a rayon or microfiber mop. Dries in 30-minutes
• For use on interior floors, such as rubber, asphalt tile, vinyl composition, sealed concrete, terrazzo and no-wax vinyl. Not for use on wood, marble, granite, natural stone, painted or stained concrete, glazed ceramic tile and newer no-wax vinyl floors

Instructions

Strip floor using ÓÈÎïÉç Commercial® Heavy-Duty Floor Stripper. Apply 1"2 coats of ÓÈÎïÉç Commercial® Stain-Resistant Floor Sealer. Allow floor to dry. Apply 4 thin coats of ÓÈÎïÉç Commercial® Wet Look Floor Finish. Allow floor to dry between coats; approximately 3 minutes under normal conditions. ÓÈÎïÉç Commercial® Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with ÓÈÎïÉç Commercial® Neutral Floor Cleaner. Keep floor dust free. Maintain by dry burnishing with a beige pad. Best results are obtained if burnished 2 to 3 times each week. This product is able to be stripped and reapplied as needed.

Pro-Tip: Step #3 (part two) in the Floor Care 4 Step Process. For best results, dry burnish with a beige pad three times a week. To periodically rejuvenate the gloss, use a ultra high-speed burnisher with a natural beige pad.

California Prop. 65

WARNING: WARNING: This product can expose you to chemicals including 2-ethoxyethanol, pentadecafluorooctanoic acid, which is/are known to the State of California to cause birth defects or other reproductive harm. For more information go to .